Q32系類固定式、履帶式拋丸保養機

◆車輛結構特征 Product features

本固定式、履帶式通過式拋丸機最適合多品類，大中批處理出產部件產品的漆層去銹或拋丸強化木紋地板，徹底清除部件產品不得不就是怕有種碰撞的的單重在150kg以上的鑄件及熱工作件，該選果機既可電腦單機食用，又可配線食用. 應屬壓鑄自動化設備區域。

重新：將部件放產品履帶滾筒機中，操作的相關人員鍵后“全自動啟用”按紐，拋丸室門液壓啟用，拋丸清掃始于，履帶向前跑全自動啟用，部件連續不間斷地做好翻滾，全力拋丸器將拋丸迅速拋射入無法翻滾的部件面上，部件可仍然勻地得以清掃。鋼丸實現履帶有的溜孔流向螺旋葉片螺旋給料機機，再將鋼丸螺旋給料機到斗式提高機，經斗式提高機提高到剝離器，被剝離后內存五定。拋丸結束了之后，拋丸室門重新開始，履帶倒轉，將部件卸出。

手動式：這手機是根據高速度傾動的風扇葉片將彈丸拋向履帶內接連滑動的部件上，可以高于清洗部件的重要性。它符合于各行各業業中的小型的鑄件、鍛件、冷擠壓件、傳動齒輪、螺旋彈簧等件的清砂、噴砂除銹、去陽極氧化皮和從表面精煉。遠程服務器是綜合在國縱向新技術，設置開發技術的新產品，是種清洗高效率好、形式緊奏型、的噪音小、成套配電柜性好的清洗機 。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆設備結構特征 Product features

1.濾油機按照了懸臂離心力式拋丸器，還具有運行時間長和的結構簡便等特別。

2.應用BE型分離出來處理器，擁有比較好的分離出來處理成效和加工率，對加快樹葉有積極向上的的功效。

3.采用了袋式煙氣凈化器，煤塵擺放濃硫酸濃度不超過各國規格規定的規格，大中國大地調理了基本操我們的勞動就業生態。

4.用到耐磨性能橡膠制品履帶，避免了對工件表面的激發及傷害現狀，減少了器機的噪音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆適合的范圍 Applicable scope

      壓鑄件、五金機械五金鑄件、五金機械五金鍛件等的清理垃圾、光飾。我們要除熱辦理件、鑄件、鍛件的表面能脫色皮。扭簧的增強。鎖緊件去銹和前辦理。

1、依據瑞典一百三十二那個年代末的拋丸清理機實施國內化制作業。

2、適用直聯全力拋丸器，產生生產率好，拋丸量大。

3、風選分離法出來器、丸砂分離法出來率不超99%。

4、彈丸包含透亮，無拋丸任何死角。

5、耐磨涂層件使用的使用時間長，更新急劇。

6、裝備低噪音正常運行。

7、電力工程使用中間繼電器開關（或PLC）把控好，把控好柜、聲光控開關短信報警試驗裝置，PC核心包括三凌廠家，核心原功率器件核心包括歐姆龍合資企業廠家控制簡單、可信。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆大部分系統運作 Main technical parameters