Q37國產吊鉤式拋丸進行清潔機

◆物品解釋 Product description

Q37(Q75)款型吊鉤式拋(噴)丸清潔機這是我大公司研究的有一種新穎機械設備。是在國內外外廣調研報告的基本條件上，只能根據觀眾的事實需要而來設計的。

吊鉤式噴砂機含有有以下缺點：

1. 分為大拋丸量、高拋射速率的懸臂式離心力拋丸器，能取得地提升徹底清除率、可以獲得令人滿意的徹底清除質量管理。

2. 仿真模擬拋射圖及通過式拋丸機的整體工程圖紙均根本所采用測算機手游輔助制定(CAD)設計，拋丸器的選購及布置設計更應該恰當。

3. 選用深受歡迎詞的無地坑結構類型類型，即節省成本了地坑條件的工程施工服務費盡快間，又防止了業主因地坑蓄水而誘發的發展機內的丸砂上銹凝固困難。

吊鉤兼具調節、正常運行和陽臺陽光房扭動的效果。

4. 請理室內外進行高鉻板或許防護，操作耐用度有很大的提升，形態美觀大氣、最易換。

自功：需拋丸除理的產品隨時底盤在吊鉤或掛墻上，勞動力帶至拋丸室前部的制動程序，吊鉤自功進人拋丸室。吊鉤進人拋丸室后，拋丸室門將手動封，電器微機聯鎖，以禁止產品在拋丸棚內參與拋丸除理時被人誤開拋丸室門。吊鉤進人拋丸室在設制的準確時間的位置作多次往復足球運動足球運動和自轉，使產品獲得全面拋射，極大減少拋射盲區。二個吊鉤、個吊鉤在拋丸棚內拋射，另個吊鉤可裝運產品。拋丸除理的準確時間可隨便調低。拋丸器已停暖機后拋丸室門點開，以帶進和帶出產品。拋丸除理中出現的焊接煙塵由三級收塵器過慮減排。

Q37(Q75) hook typeshot cleaning machine is a new equipment developed by our company. It is widely based on the research of the user, according to the actual needs of the design at home and abroad.

Advantages:

1. The amount shot, high speed of aerosol propellant international advanced cantilever centrifugal peen-forming implement, can improve clean rate, obtain satisfactory cleaning quality.

2. Trajectory simulation diagram and the machine shot all drawings are completely using computer aided design (CAD) is drawn, is shot selection and arrangement of the more reasonable.

3. The highly popular no pit structure , namely save the pit of the construction cost and time based, and solves the user for pit and cause the ascension of the standing device inside the pill sand. Corrosion agglomerate hook up with, operation, and the function of the indoor spin.

4. Clean indoor with using high chrome plate protection, service life greatly improved, beautiful appearance, easy to change.

Automatic: The workpiece need to shot is directlyhanged in the treatment or hang hooks on toshot, artificial with the front of the room, hook automatic traction systemshot into the room. Hook into is shot peen-forming room after room, pneumatic, electric interlocking goalkeeper closed, in order to avoid the workpiece in indoors is shot peen-forming processing by mistake when others open peen-forming room door. Hook into the room is shot in the back and forth position set interval reciprocal motion and rotation, to make the work be fully aerosol propellant, reduce aerosol propellant blind Angle. Two hooks, a hook on peen-forming indoor aerosol propellant, another hook can be unloading workpieces. Peen-forming processing time can be arbitrary adjustment. After the stop is shot peen-forming room door open, in order to bring in and take workpiece.Shot in the treatment of dust produced by secondary filter filter emissions.

◆使用位置 Applicable scope

鋁硬質和金壓鑄件、鋅硬質和金壓鑄件、銅鑄件、304不銹鋼精密制造鑄件、塑料件、摩托三輪車窗框及不銹鋼品件的外觀進行清理、光飾、加強。

Aluminium alloy die casting, zinc alloy die casting, the copper pieces, stainless steel precision castings, castings, motorcycle frame and steel products a surface cleaning, light act the role ofing, strengthening.

Q37產品吊鉤式拋丸清除垃圾機

◆產品的優點 Product features

1、參照物瑞士90時代末的通過式拋丸機做國產品牌化制做。

2、拋丸器選擇直聯發直流無刷三相異步電機帶動，發直流無刷三相異步電機為變頻發直流無刷三相異步電機，可變氣門正時頻變速。

3、鋼丸客流量設定閥可微量分析調結，自動揭開與關了。

4、所采用芯筒脈沖發生器反吹風式除塵處理機系統。

5、電力工程進行PLC有效控制PLC操作儀挑選島國三菱數控系統，電pcb板挑選simens或歐姆龍產品設備。

6、無地坑設置。

1. Peference toGermany at the end of the ninety’s shot used the machine manufacturing.

2. Shot machinehas the direct coupling motor drive, motor for frequency conversion motor,variable frequency speed regulation.

3. Steel shot flow control valves can trace adjustment, pneumatic open and shut.

4. The world's most advanced core canister pulse blow type dust removal system.

5. Electrical PLC control PLC control instrument selection Japan mitsubishi, electricalcomponents choose Siemens or omron products.

6. Design without pit.

◆新產品介紹 Product description

1、在標準化機器中，拋丸清理機標配自動改電動式擺軟件系統。

2、對於中重型零部件，噴砂機待選供配電動鋼絲繩電動葫蘆。

3、拋丸室的門有氣動平衡或全自動鎖閉。

1. In the standard model, shot machine is equipped with manual suspension system.

2. For heavy workpiece, shot machine can be equipped with electric hoist.

3. The door of the room has a pneumatic or manual opening and closing.

人工操作：本型深度采取清潔機適于于鍛造加工、建筑工程、石油化工、高壓電機、加工中心等相關行業的中、小形鑄、鍛件的漆層深度采取清潔或升星辦理。十分適于于多木種、小一鍵的鑄件、鍛件、鋁鎂合金鑄件及鋼構造件采取漆層深度采取清潔及拋丸升星，以擦掉鏜孔漆層的大量粘砂、砂芯及氧化反應皮；亦適于于對熱辦理件的漆層深度采取清潔及升星；非常適于于不適合相碰的細長、厚壁件的深度采取清潔。

manual operation: This type of cleaning machine for foundry, construction, chemical, electric machine, machine tools, and other industries, small casting, forging of surface cleaning or strengthen treatment. Particularly suitable for variety of and small batch of castings, forgings, aluminum alloy castings steel structure and surface cleaning and peen-forming reinforcement to remove a small amount of the surface adhering sand, sand core and oxide skin; Also suitable for heat treatment a surface cleaning and strengthened; Especially suitable for long, should not be collision thin-walled package to clear.

We use shot technology to achieveshot cleaning rust, strengthen the purpose, because cleaning now is still the world's most economic and the most reliable method.

◆成品基本特征 Product features

* 延長機器廠品和合金材料鋼結構材料構件的抗身體疲勞功效

Lmproving the anti-fatigueperformance ofmechanical products and metal components

* 清理壓力匯聚

Eliminate stress concentration

* 提高其應用壽命

Prolong the service life

* 優化提升產品工件的單單從表面的工藝感覺

Optimizate the surface of the workpiece

* 有很大程度的提供保養使用率

Greatly improve the efficiency of cleaning up

* 緩解清除垃圾工作中的勞動者構造

Reduce the labor intensity of cleaning up

* 調低環境被污染的

Reduce environmental pollution

◆適用于范圍內 Applicable scope

本型主設備具有廣泛性應用領域于設備研發、工程施工設備、礦區設備、壓強場所、汽車的、海船等企業，主要用于提升 其設備零機件的油漆顏色產品和單單從表面生產技術睡眠狀態。

This equipment is widely used in mechanical manufacturing, engineering machinery, mining machinery, pressure vessel, automobile, shipbuilding industry, used for improving the product quality and the appearance of the parts surface process condition.

◆重要技巧型號規格 Main technical parameters